Tektronix Phasershare Printer - Manual (Page 34)

4
Novell NetWare Configuration
28 PhaserShare Networking
Setting IPX frame types from the front panel
Setting IPX frame types: Phaser 740 and Phaser 360 front panels
1. Enter the Network Settings menu:
a. Press Menu ; the front panel displays Help Pages .
b. Press ----> or <---- until the front panel displays Network
Settings .
c. Press Menu ; the front panel displays TCP/IP .
2. Access the menu of frame types:
a. Press ----> until the front panel displays NetWare .
b. Press Menu ; the front panel displays Enable Interface .
c. Press ----> ; the front panel displays IPX Frame Type .
d. Press Menu ; the front panel displays the first in a menu of frame types.
3. Enable or disable the frame type:
a. Press ----> until the frame type you want is displayed.
b. Press Menu to display the current status of the frame type:
Enabled or Disabled.
c. Press ----> until the frame type is either Enabled or Disabled ,
as desired.
d. Press OK to enter your choice into the printer. The front panel
briefly displays Selected , then returns to the display of the frame
type name.
4. You can set more than one frame type; to set other frame types, repeat
Step 3.