Tektronix Phasershare Printer User Manual
Page 63
Setting the Printer’s IP Addressing Parameters
8
Setup Guide
57
7.
To set the gateway address:
a.
Press
until
Gateway Address
is displayed.
b.
Press
Menu
; the front panel displays the gateway address.
c.
Use
and
as described in Steps 4d through 4f to set the
gateway address.
d.
When the gateway address is set, use
Set
and
Confirm
as
described in Steps 4g and 4h to enter the gateway address into the
printer.
e.
Press
;
the front panel displays:
TCP/IP
Gateway Address Menu
8.
The printer calculates the broadcast address based on the IP address
and the network mask. However, the broadcast address can be viewed
and set using the following procedure:
a.
Press
until
Broadcast Address
is displayed.
b.
Press
Menu
; the front panel displays the broadcast address.
c.
Use
and
as described in Steps 4d through 4f to set the
broadcast address.
d.
When the broadcast address is set, use
Select
and
Confirm
as
described in Steps 4g and 4h to enter the broadcast address into the
printer.
e.
Press
;
the front panel displays:
TCP/IP
Broadcast Address Menu