Toshiba multifunctional digital color systems e-STUDIO4540C - Manual (Page 41)

1.SETTING ITEMS (USER)
Managing Address Book 39
1 SETTING ITEMS (USER)
Registering contacts from Log lists
You can register information such as remote fax numbers and e-mail addresses in the address book from the Send/
Receive Log screen.
The following information can be registered from the Send Log:
y Remote fax numbers that were dialed by direct entry, or that were searched for by the LDAP server
y E-mail addresses that were manually entered, or that were searched for by the LDAP server
The following information can be registered from the Receive Log:
y Remote fax numbers that were dialed by direct entry, or that were searched for by the LDAP server for a polling
reception
y E-mail address of the sender
The following information can be registered from the Scan Log:
y E-mail addresses that were manually entered
1 Press [JOB STATUS] on the touch panel.
2 Press the [LOG] tab and press [SEND] (or [RECEIVE] or [SCAN]).
The SEND (or RECEIVE or SCAN) LOG list is displayed.
3 Select the job that includes the fax number or e-mail address you want to register into
the address book, and press [ENTRY].
To register e-mail addresses specified as Bcc contacts into the address book from the scan log, it is necessary
to enable the [BCC Address Display] option from the TopAccess - Email menu. If the [BCC Address Display]
option is disabled, the description [BCC Address] is displayed instead of an e-mail address in the Scan Log
screen. In this case, even if you select the description [BCC Address], [ENTRY] cannot be used. For
instructions on how to enable the [BCC Address Display] option, refer to the TopAccess Guide “Chapter 8:
[Administration] Tab Page”.