Toshiba multifunctional digital color systems e-STUDIO4540C - Manual (Page 211)

2.SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting 209
2 SETTING ITEMS (ADMIN)
‰ Setting EAP-TTLS
The CA certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are
performed. For instructions on how to install the certificate, refer to the TopAccess Guide “Chapter 8:
[Administration] Tab Page”.
1 Select [EAP-TTLS] and press [Next].
The WIRED 802.1X SETTINGS (EAP-TTLS) screen is displayed.
2 Select the desired inner authentication method and continue the operation that you
require.
P.209 “Setting EAP-MSCHAPv2 for inner authentication”
P.210 “Setting PAP for inner authentication”
P.211 “Setting CHAP for inner authentication”
P.212 “Setting EAP-MD5 for inner authentication”
Setting EAP-MSCHAPv2 for inner authentication
1 Select [EAP-MSCHAPv2] and press [Next].
The WIRED 802.1X SETTINGS (EAP-MSCHAPv2) screen is displayed.