Oki FAX 740 - Manual (Page 73)

73
Statutory User Information (UK only)
The OKIFAX 740 is a pproved f or connection to
telecommunications systems specified in the instructions
for use subject to the conditions set out in them. The BABT
approval number for the OKIFAX 740 is:
The OKIFAX 740 has a REN (ringer equivalence number)
value of 1. The REN is a customer guide indicating the
maximum number of apparatus that should be
simultaneously connected to the line. The total REN values
of each of the items of apparatus must not exceed a REN
value of 4. This value includes a telephone which, unless
otherwise stated, has a REN value of 1.
This apparatus has been approved for the use of the
following facilities:
• manual call initiation
• operation in the absence of proceed indication
• auto answer
• modem
• series connection
• simple telephone
Any other usage will invalidate the approval of the apparatus
if as a result it ceases to conform to the standards against
which the approval was granted.
Interconnection circuits should be such that this equipment
continues to comply with the requirements of 4.2 of EN
41003 for TNV circuits and 2.3 of EN60950 for SELV
circuits after making connections between circuits.
Interconnection points ‘Line/TEL1/TEL2’ are for
connection to TNV circuits, and the ‘Power Inlet Socket’
is for connection to a 220-240VAC, 50/60Hz supply.
The apparatus has been approved for connection to the
public switched telephone network provided by British
Telecommunications Plc, Kingston Communications Plc,
or Mercury Communications Ltd.
The OKIFAX 740 may be connected to any direct PSTN
exchange line except as an extension to a payphone. The
exchange line must provide facilities for either loop-
disconnect or multi-frequency (MF) dialling.