Oki FAX 740 - Manual (Page 28)

28
Transmission After Voice
This method of transmission is used if you have been in
conversation with the remote party, and you then wish to
send a fax before hanging up.
1. Load your document face down, top first, into the
document feeder.
2. Ask the remote party to press their Start key.
3. Press [START] while still keeping your telephone off hook.
4. Wait for the message “TRANSMITTING” to appear
in the display.
5. Hang up the telephone handset.
Dialling with the Numeric Keypad
This method is used to send fax messages to infrequent
destinations (frequent destinations may be programmed into
the Quick Dial feature).
1. Prepare your document to send as described earlier (see
Prepare to Send).
With your document loaded, the display will read:
QUICK:_ ■ ■ ■ ■ ■
KEYPAD
or
DIAL: KPAD/QUICK
2. Press [QUICK] if necessary, so that the display reads:
DIAL: KPAD/QUICK
3. Dial the number you require using the numeric keypad.
If you enter an incorrect digit, press [CLEAR] to erase it.
If you are connected via an internal telephone exchange
which requires an access digit (usually 9) for an outside
line, followed by a short pause, press
[PAUSE] after the
access digit. This will appear in the display as “–”.
4. Press [START] to commence dialling.