Oki FAX 740 - Manual (Page 21)

21
Initial Settings
1. Ensure that the ac power socket, if switched, is turned
on.
2. Set the ac power on/off switch (1) on your OKIFAX
740 to ON.
The next task is to adjust a number of settings in your
OKIFAX 740 memory. These settings will be stored, even
after power is turned off.
Personal ID (Function 24)
This item holds your name (or any other text) which will
appear on the remote display if this function is supported.
1. Press [FUNCTION] [2] [4].
PERSONAL ID? Y/N
2. Press [YES].
3. Select the required characters from the list available
(see table). Press [*] to move backwards through the
list, or [#] to move forwards.
Press [CLEAR] to advance the cursor to the next character
position.
4. Press [YES] to confirm the entry.
The display reads:
INITIALIZE, WAIT
After a few seconds, the display reads:
READY 99% 12:00
Three items are displayed: Machine Status (READY),
Memory Available (99%) and the Time (12:00).
➊