Oki FAX 740 - Manual (Page 27)

27
Transmission
Prepare to Send
1. Ensure the OKIFAX 740 is in standby mode (display
reads READY).
2. Select the resolution required:
Fine Photo
LED LED Resolution Application
Off Off Standard Ordinary, clear, b lack &
white text or line drawings.
On Off Fine Documents which contain
fine detail, including very
small print.
On On Photo Documents containing
photographs or other full
colour pictures.
To set the resolution, press [RESOLUTION] until the
appropriate LED’s are illuminated.
3. Select the required contrast. Press [ORIGINAL] until the
display confirms Light, Normal or Dark.
4. Place the document face down, top first, into the
document feeder. You may load documents up to 20
pages.
Ensure that documents are flat, undamaged, dry and
contain no paper clips or staples. If a document to be
sent cannot meet these requirements, photocopy it and
use the copy.
5. If the Page Count feature is turned on, you will be
prompted to enter the number of pages in your
document. If you do not wish to enter this detail on
this occasion, press
[NO] .
Note: Throughout this guide, where a dialling prompt
appears in the display, the
[QUICK] key switches back
and forth between keypad number entry and quick
dialling of stored fax numbers.