Oki FAX 740 - Manual (Page 64)

64
Installing Additional Memory
This kit contains an additional 1MByte extra memory in
the form of two memory chips, which may be fitted to
your OKIFAX 740 in a matter of minutes.
Note: These memory chips are extremely sensitive to static
electricity. Care must be exercised in handling them.
Also take care not to bend or damage the pins on
these devices. If in any doubt, consult your dealer.
To install the option memory, proceed as follows:
1. Switch off the ac power switch on your fax machine.
2. Remove any documents from the document feeder, and
remove all paper from the automatic paper feeder.
3. Turn the machine onto its left side.
4. Pull out the paper catch tray to reveal the small silver
coloured panel (1) on the bottom of the machine.
5. Insert a small screwdriver into the slot on the cover
and gently push the cover upwards, and then towards
you and away from the machine.
6. Grasp the cover with your fingers and pull it down and
clear of the machine.
➊