Oki FAX 740 - Manual (Page 10)

10
Removal of Transport Materials
1. Remove any adhesive tape from the outside surfaces
of the machine.
2. Press down the cover release tab (1) and lift the top
cover to the fully upright position.
5. Pull the paper feeder (1) towards the front of the
machine to open the feeder. Pull out the sheet of transit
paper (2) from the paper feeder.
3. Pull out the sheet of transit paper from under the paper
feed roller (2).
6. Push the feeder (1) towards the rear of the machine to
close it.
7. Install the paper support (3) into the slots at the rear of
the paper feeder (1).
4. Lower the top cover and press down firmly to close.
➊
➋
➊
➌
➊
➋
➍
8. Pull out the paper catch tray (4) to accomodate the size
of recording paper you will use.