Oki FAX 740 - Manual (Page 29)

29
The call is placed automatically. When the remote fax
machine answers, the message “TRANSMITTING” is
displayed and your document is sent. During the
transmission the remote identification (name or
telephone number) is displayed.
When transmission is complete, your OKIFAX 740
returns to standby automatically.
Dialling with the Quick Dial Feature
Your OKIFAX 740 has 60 memories to store frequently
called telephone numbers. 10 numbers can be stored for
one-touch dialling using the keys
[A] to [J] , and a further 50
numbers may be stored in memory locations numbered 10
to 59, accessed via the numeric keypad.
This section describes how to dial a frequently used number
using the Quick Dial feature. It is assumed that your
frequently used numbers have already been programmed
into the OKIFAX 740 memories. For information on
programming numbers see later in the “Programming”
section.
1. Prepare your document to send as described in Prepare
to Send earlier.
QUICK:_ ■ ■ ■ ■ ■ KEYPAD
or
DIAL: KPAD/QUICK
2. Press [QUICK] if necessary, so that the display reads:
QUICK:_ ■ ■ ■ ■ ■
KEYPAD
3. For one-touch dialling, press the appropriate one-touch
key [A] to [J] . For two-touch quick dialling, enter the
appropriate two-digit memory number via the numeric
keypad.
Note: Five one-touch keys are provided, for memories A
to E. To access memories F to J, first press [SHIFT] ,
then press the appropriate one-touch key.