Onkyo TX-DS656 - Manual (Page 39)

39
Using the Surround modes
Selecting a Surround mode
Using the on-screen Menu
For how to use the on-screen Menu, see "Selecting a Menu item" on
page 19.
1. Press the ENTER button.
The Menu appears on the TV screen. (a)
2. Select "Surround Setup" using the y or u cursor button and
then press the s cursor button to display the Surround Setup
screen. (b)
3. Select the desired surround mode parameter using the y or u
cursor button and enter the setting using the a or s cursor
button.
Use the y or u cursor button to move among the parameters.
"Surround Mode" setting
Select one of the following: DOLBY DIGITAL, DOLBY PRO
LOGIC, HALL, LIVE, ARENA, STUDIO, DOLBY 3 STEREO,
STEREO.
Setting the surround mode parameters
The parameters available for the selected surround mode are shown.
Set each parameter by following the same procedure as that for the
surround mode setting. For details of surround mode parameters, see
"Changing the surround mode parameters" on page 40.
4. Press the ENTER button.
*** Menu ***
Input Selector
Rec Selector
Surround Setup
Screen Setup
System Setup
** Surround Setup **
Surround
Mode= HALL
Hall Size = LARGE
Effect Level = 1.0
Reverb Level = 1.0
b
a
Using the remote controller
Press the SUR MODE button repeatedly to select the desired surround mode.
The indicator on the display changes each time you press this button.
• In modes other than DOLBY DIGITAL
DOLBY PRO LOGIC
→
HALL
→
LIVE
→
ARENA
→
STUDIO
→
STEREO
→
(DOLBY PRO LOGIC)
• In DOLBY DIGITAL mode
DOLBY DIGITAL
↔
DOLBY DIGITAL STEREO
Note:
• Even if "STEREO" mode is set, the DOLBY DIGITAL indicator
appears as soon as a Dolby Digital encoded signal is input.
• If no surround speakers are connected, the display will show DOLBY 3
STEREO and STEREO every time the SUR MODE button is pressed.
Using the front panel
Press the SURROUND button and then rotate the SMART SCAN
CONTROLLER clockwise or counterclockwise to select the desired
surround mode.
The current surround mode is shown on the display.
* An indication such as "3/2 ch" appears in the main unit's multi-function
display to indicate which of the three front channels and two surround
channels are available for sound output.
MUTING
POWER SLEEP
DVD VIDEO-1 VIDEO-2
TAPE-1 TUNER PHONO C D
SOURCE SELECTOR
DVD
DISC
PAUSE
/ STEP
TONE TEST MODE SUR
VIDEO-3 M TI-CH UL
INPUT
TAPE-2
POWER
POWER
TAPE C D
TV/ VCR
VOLUME
TUNER
/ REMOTE
SPEAKER
CURSOR
ENTER
REMOTE CONTROLLER
CH SEL
SENDING/ LEARN SUBROOM
C H
A B
LEVEL
DIMMER
PRESET GROUP
LEARNED
PROGRAMMABLE AREA TV VIDEO /
SUBTITLE ON / OFF
RC-373M
VOLUME
MASTER VOLUME
MAX MIN
TREBLE
SYSTEM
PHONES
DISPLAY PTY/ TP CHARACTER SCAN GROUP MEMORY FM MUTE / MODE
CLEAR
TI CH INPUT MUL
VIDEO CAM INPUT / 3 VIDEO
VIDEO AUDIO L R(MONO)
BASS
DIGITAL AUDIO SELECTOR
S VIDEO
STAND-BY
AUTO TUN
SMART SCAN CONTROLLER
ENTER
3-D BASS MAIN REMOTE SPEAKERS
PRESET
TUNING
SURROUND
PARAMETER
CD PHONO AM FM TAPE-2 MONITOR TAPE-1 M D VIDEO-3 CAM VIDEO-2 VCR-2 / TV VIDEO-1 VCR-1 DVD
MIDNIGHT
THEATER Re-EQ MULTI SOURCE REC OUT
AUDIO VIDEO CONTROL RECEIVER TX-DS 656
POWER
OFF ON
SMART SCAN CONTROLLER jog dial
SURROUND button