Onkyo TX-DS656 - Manual (Page 18)

18
On-screen setting
If your TX-DS656 is connected to a TV set, you can perform various settings on the TV screen. This section shows you the basic operation of on-
screen setting, as well as the method of changing the screen setup according to your preference.
Selecting the NTSC or PAL system (not available on
U.S. and Canadian models)
The on-screen display is not output to any of the S-VIDEO connectors.
If the picture on the screen scrolls with the TV signal that is being
received, change the system setting.
Press the VIDEO-1 button to display "OSD". Rotate the SMART
SCAN CONTROLLER clockwise or counterclockwise until the
desired system appears on the display.
If "OSD AUTO" is selected, the unit automatically selects the system
used by the connected TV/monitor or projector.
POWER SLEEP
DVD VIDEO-1 VIDEO-2
TAPE-1 TUNER PHONO C D
SOURCE SELECTOR
DVD
DISC
PAUSE / STEP
VOLUME
TONE TEST MODE SUR
VIDEO-3 M TI-CH UL
INPUT
TAPE-2
POWER
POWER
TAPE C D
TV/ VCR
VOLUME
TUNER
MUTING
/ REMOTE
SPEAKER
CURSOR
ENTER
REMOTE CONTROLLER
CH SEL
SENDING/ LEARN SUBROOM
C H
A B
LEVEL
DIMMER
PRESET GROUP
LEARNED
PROGRAMMABLE AREA TV VIDEO /
SUBTITLE ON / OFF
RC-373M
Cursor buttons/
ENTER button
MASTER VOLUME
MAX MIN
TREBLE
SYSTEM
PHONES
DISPLAY PTY/ TP CHARACTER SCAN GROUP MEMORY FM MUTE / MODE
CLEAR
TI CH INPUT MUL
VIDEO CAM INPUT / 3 VIDEO
VIDEO AUDIO L R(MONO)
BASS
DIGITAL AUDIO SELECTOR
S VIDEO
STAND-BY
AUTO TUN
SMART SCAN CONTROLLER
ENTER
3-D BASS MAIN REMOTE SPEAKERS
PRESET
TUNING
SURROUND
PARAMETER
CD PHONO AM FM TAPE-2 MONITOR TAPE-1 M D VIDEO-3 CAM VIDEO-2 VCR-2 / TV VIDEO-1 VCR-1 DVD
MIDNIGHT
THEATER Re-EQ MULTI SOURCE REC OUT
AUDIO VIDEO CONTROL RECEIVER TX-DS 656
POWER
OFF ON
SMART SCAN CONTROLLER jog dial
VIDEO-1 button
If remote control operation is inoperative...
If pressing a remote controller button has no effect on the TX-DS656
even though the remote controller's SENDING/LEARNED indicator
lights, verify that the A/B-SUBROOM/LEARN switch is set to "A".
Note:
• On-screen setting is possible only when your TV is connected to the
MONITOR OUTPUT V connector. The Menu will not appear if it
is connected to the MONITOR OUTPUT S connector.
• The Menu will not be recorded even if it is displayed during
recording.
• The Menu will not appear if the input selection on the TV is
incorrect. Select the correct input channel that is connected to the
MONITOR OUTPUT V connector of the TX-DS656.