Renesas Emulator Debugger M16C PC4701 - Manual (Page 218)

7.14.10 Display the Alarm Handler Status
In the MR window, select Popup Menu - [Mode] -> [Alarm Handler].
When the realtime OS is MRxx conformed to uITRON specifications V.3.0, the following data is
displayed in the status bar.
7.14.10.1 Display the Alarm Handler Status(When the realtime OS is MRxx conformed to uITRON
specifications V.3.0.)
Of all the cycle start handlers defined in the configuration, only those which are not started yet at
present are listed in the ascending order of start time. The function of each item is listed below.
(When the realtime OS is MRxx conformed to uITRON specifications V.3.0.)
Item Contents
ID
ID No. of alarm handler
StaAddr Starting address of alarm handler
(name) Name of alarm handler
AlarmTime Starting time of alarm handler
7.14.10.2 Display the Alarm Handler Status(When the realtime OS is MRxx conformed to uITRON
specifications V.4.0.)
Of all the cycle start handlers defined in the configuration, only those which are not started yet at
present are listed in the ascending order of start time. The function of each item is listed below.
(When the realtime OS is MRxx conformed to uITRON specifications V.4.0.)
Item Contents
ID
ID No. of alarm handler
Name Name of alarm handler
Almtim The amount of time by the millisecond remaining before the alarm
handler's activation time
Status Activity status of alarm handler
•
The following are displayed in the Status area:
TALM_STA Alarm handler is in an operational state
TALM_STP Alarm handler is in a non-operational state
204