Renesas Emulator Debugger M16C PC4701 - Manual (Page 192)

7.11.7 Display of bus information on the M16C/R8C Debugger
From left to right, the contents are as follows:
•
Address
The status of the address bus
• Data
The status of the data bus
• BUS
The width of the external data bus ("8b" for an 8-bit data bus, and "16b" for a 16-bit data bus)
• BIU
This shows the status between the BIU (bus interface unit) and memory, and BIU and I/O.
Display format Status
- No change
DM A Data access other than a C U cause such as DMA P
IN T Start of INTACK sequence
IB Instruction code read due to CPU cau e (bytes) s
DB Data access due to CPU cause (bytes)
IW Instruction code read due to CPU caus (words) e
DW Data access due to CPU cause (words)
•
R/W
Shows the status of the data bus ("R" for read, "W" for write, "-" for no access).
• RWT
This signal shows the effective position in the bus cycle ("0" when effective. Address, Data, and
BIU signals are valid when RWT is "0".
• CPU
Shows the status between CPU and BIU (bus interface unit )
178