Radio Shack 43-3570 - Manual (Page 36)

Caller
ID
36
C
HAIN
D
IALING
The memory locations in the handset are
not limited to phone numbers. You can also
store a group of numbers (up to 20 digits),
that you need to enter once your call
connects. This is referred to as Chain
Dialing.
An example of this is a bank account
number. Store the account or special
number in one of the phonebook locations.
(Refer to “Storing Phone Numbers, Names,
Distinctive Rings, and Speed Dial” on
page 30). When you call your bank, and you
are prompted to enter the account number,
scroll through your phonebook locations
until you find your account or special
number, and then press
SELECT/ .
CALLER ID
C ALLER ID AND CIDCW
(C
ALLER
ID
ON
C
ALL
W AITING )
You must subscribe to Caller ID services
through your local telephone provider to use
these features.
When the telephone rings, the Caller ID
feature allows you to view the caller’s name,
and phone number along with the date and
time of call. With CIDCW (Caller ID on Call
Waiting), you will hear a call waiting tone
while you are on a call, and the Caller ID
data is displayed. To accept the waiting call,
press
TALK/FLASH (see “Flash and Call
Waiting” on page 29).
Ф
Ф
NOTES
Ô
• If you answer a call
before the Caller ID
message is received (for
example, before the
second ring), the Caller
ID message will not
appear.
• When the call is received
via a telephone company
that does not offer Caller
ID service, the caller’s
phone number and
name does not appear.
(This includes some
international calls.)
• When the call is via a
private branch exchange
(PBX), the caller's phone
number and name may
not appear.
• Data errors appear as
“
❚ ”.