Radio Shack 43-3570 User Manual

Page 10

Text mode
Original mode

Installation

3. Plug one end of the supplied modular

cord (short for a wall plate, long for
direct wall mounting) into the

TEL LINE

jack on the base’s back.

4. Insert the supplied AC adapter's barrel

plug into the

DC IN 9V

jack.

5. Route the

adapter and
modular cords
through the
base’s grooves.

6. For a wall plate,

plug the
modular cord’s other end into the wall
plate jack, then align the base’s keyhole
slots with the wall plate studs and slide
the base downward to secure it.

For direct wall
mounting,
align the
base’s
keyhole slots
with the
mounting
screws and
slide the base downward to secure it.

7. Plug the adapter into a standard AC

outlet.

8. Lift the base’s antenna to a vertical

position.