Radio Shack 43-3570 - Manual (Page 15)

Sett
ing Men
u Opt
ions
15
Global Setup
If you change one of the Global settings, you change the setting for all
additional handsets. Only one handset can change Global settings at a
time.
System Reset
System Reset is used to clear the handset's ID from the main base unit,
or the base ID from the handset.
Submenu option Description
Day & time
(Default is SUN
12:00 AM) Set the day and time of your display (see “Setting Day and
Time” on page 20).
CIDCW
(Default is CW on/
CWDX off)
Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW
performs the same as regular Caller ID on a call waiting
number (see “Setting CIDCW (Caller ID on Call Waiting)” on
page 20). Call Waiting Deluxe allows you to handle call
waiting calls in seven different ways (see “Call Waiting Deluxe
Features” on page 40).
Area Code
Store or edit the area code. If you enter a 3-digit area code
number in the “Area Code” option, your local area code does
not appear in the Caller ID message. For calls received from
outside your local area code, you will see a full 10-digit number
(see “Setting the Area Code” on page 21). Note: If your calling
area requires 10-digit dialing, do not program this option.
Dial Mode
(Default is tone)
Set the dial mode to tone or pulse (see “Setting the Dial
Mode” on page 21). Most phone systems use tone dialing,
which sends DTMF tone through phone line, the default
setting is tone dialing. Depends on your dialing system, set
the dial mode.
Copy Phonebook
Allow you to transfer the phonebook data stored in one handset
to another handset (see “Copy Phonebook” on page 21).
Voice Mail Tone
(Default is on)
If your service does not support SDT message signal, set
your VMWI (Visual Message Waiting Inculcator) not to detect
SDT message signal (see “Voice Mail Tone” on page 22).
Submenu option Description
Deregister HS
Clear the handset ID from the base. Use this option, for
example, when you change the digital security code (see
“De-register the Handset” on page 22).
Replacing Base
Clear the base ID. Use this option, for example, if you
wish to deregister the base to use the handset with 43-
3570 (see “Replacing the Base Setting” on page 23).