Radio Shack 43-3570 - Manual (Page 31)

Phon
ebook
31
3. Enter the name (up to 16 characters) by
using the number keypad (see the
“Steps for Entering Names and Special
Characters”).
If a name is not required, go to step 4.
will be used as the name.
4. Press SELECT/ to store the name,
Store/Edit No. appears.
5. Press the number keypad to enter the
phone number (up to 20 digits), press
SELECT/ to store the number. Ô
6. Distinctive Ring appears. Press
VOL/RING/ or VOL/RING/ to move
the pointer to one of the Distinctive Ring
options, and then press
SELECT/ .
Ô
7. Speed Dial appears. Press
VOL/RING/ or VOL/RING/ to move
the pointer to select the Speed dial
location (10 locations: SPD1-SPD0).
Ô
8. Press SELECT/ . You will hear a
confirmation tone, and Done! appears
in the display.
S TEPS FOR E NTERING N AMES
AND S PECIAL C HARACTERS
Refer to the letters on the number keys to
select the desired characters. With each
press of a number key (
0 - 9 ), the displayed
character appears in the following order:
upper case letters first, lower case letters
next and finally the number corresponding
to the key.
Ô
NOTES
Ô
• If you choose not to
store a “Distinctive
Ring”, simply select the
“
No Selectn ” option.
• Selecting a speed dial
location where a number
is already stored,
releases the old
number’s speed dial
setting. The new number
will be stored in the
speed dial location.
• If you choose not to
store the name/number
as a Speed Dial, simply
select the “
No
Selectn ” option.
Number of times key is pressed