Roland AT20s - Manual (Page 95)

95
Various Other Settings
Registration Transpose Update
(Transpose Setting Recall Timing)
You can specify how the transpose setting will be recalled
when you press a Registration button [1] – [4].
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to
select “Trans. Update.”
3. Press the Value [-] and [+] buttons to change
the setting for Trans. Update.
DELAYED Transpose settings will be recalled when
you hold a Registration button for several
seconds.
INSTANT Transpose setting will be recalled the in-
stant you press a button along with all other
panel settings.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
➔ This setting remains stored in memory even while power is
turned off.
Adjust the Standard Pitch
(Master Tune)
The basic pitch of an instrument is generally considered as
the pitch of the middle A note. The “Master Tune” parameter
lets you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the AT-20S.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to
select “Master Tune.”
3. Press the Value [-] and [+] buttons to adjust the
basic pitch.
Settings 415.3Hz – 466.2Hz (0.1 Hz units)
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
➔ By pressing the Value [+] and [-] buttons simultaneously, you
can restore the default setting (440.0 Hz).
➔ This setting remains stored in memory even while power is
turned off.
Adjust the LCD Contrast (LCD
Contrast)
This setting allows you to adjust the contrast of the display.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to
select “LCD Contrast.”
3. Press the Value [-] and [+] buttons to adjust the
contrast of the screen.
Available settings 1–10 (higher values will darken the
display)
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
➔ This setting remains stored in memory even while power is
turned off.
AT-20S.e.book 95 ページ ２００３年１１月１０日 月曜日 午後２時３７分