Roland AT20s - Manual (Page 74)

74
Record and Playback Your Performance
Deleting Performance Songs Stored on Disk
Follow the steps below to erase a performance song that was saved onto a floppy disk.
1.
Insert the floppy disk containing performance songs into the disk
drive.
2.
Press the [Function] button.
3.
Press the Select [-] or [+] button to select “Disk Utility.”
fig.08-13
4.
Press the [Rec] button.
5.
Press the Select [-] or [+] button to select “Delete Song.”
fig.08-29
6.
Press the [Rec] button.
To cancel the procedure, press the [Reset] button.
7.
Using the [Bwd]/[Fwd] buttons, select the performance song to be
erased.
8.
Press the [Rec] button.
You will see the following:
fig.08-30
To cancel the procedure, press the [Reset] button.
9.
To delete the performance song, press the [Rec] button again.
When erasing is completed, the basic screen reappears.
AT-20S.e.book 74 ページ ２００３年１１月１０日 月曜日 午後２時３７分