Roland AT20s - Manual (Page 81)

81
Settings for the Composer
Changing the Function of the
Expression Pedal (Exp. Source)
Specify how the Expression Pedal will function when your
performance is being recorded and when ATELIER song files
are being played back.
■ Function During Recording
Specify whether Expression Pedal operations will be
recorded or not while your performance is being recorded.
1. Press the [Function] button.
2. Press the [-] or [+] Composer Select button to
select “Exp. Source.”
fig.09-06
3. Press the [Rec] button.
4. Press the Select [-] or [+] button to select
“Recording.”
5. Press the [Bwd]/[Fwd] buttons to specify the
pedal function.
fig.09-07
PEDAL Expression Pedal movements will be re-
corded. The previous recording will be
erased as new songs are recorded.
COMPOSER Expression Pedal movements will not
be recorded.
The previous data will remain without
being erased.
To return to the basic screen, press the [Function] button
or the [Display/Exit] button.
■ Function During Playback
You can specify whether or not the Expression pedal will
function while ATELIER song files are being played back.
1. Press the [Function] button.
2. Press the Select [-] or [+] button to select “Exp.
Source.”
fig.09-06
3. Press the [Rec] button.
4. Press the Select [-] or [+] button to select “Play-
back.”
5. Press the [Bwd]/[Fwd] buttons to specify the
pedal function.
fig.09-08
PEDAL+COMP Expression pedal will function. Expres-
sion pedal recording within the song file
will also be effective.
COMPOSER Expression pedal will not function. The
Expression pedal recording within the
song file will be effective.
PEDAL Expression pedal will function. The Ex-
pression Pedal recording within the
song file will be ignored.
To return to the basic screen, press the [Function] button
or the [Display/Exit] button.
AT-20S.e.book 81 ページ ２００３年１１月１０日 月曜日 午後２時３７分