Roland AT20s - Manual (Page 57)

57
Using the Registration Buttons
Deleting a Set of Registrations from a Floppy Disk
Here’s how to delete a Registration set that was saved to a floppy disk.
1.
Insert the floppy disk containing the Registration into the disk drive.
2.
Press the [Registration] button (indicator lights).
3.
Press the Select [-] and [+] buttons to select the Registration set
that you wish to delete.
fig.07-13
4.
Simultaneously press the [Function] button and the [Save] button.
The following display appears.
fig.07-17
To cancel the operation, press the [Reset] button.
5.
If you are sure that you wish to delete the data, press the [Rec] but-
ton.
When the Registration has been deleted, the basic screen reappears.
When a Registration set has been deleted, the indication of “USE” will change back to “-
- -.” If you had assigned a name to the Registration set you deleted, the name will revert
back to “REGIST-XX.”
fig.07-18
AT-20S.e.book 57 ページ ２００３年１１月１０日 月曜日 午後２時３７分