Roland AT20s - Manual (Page 68)

68
Record and Playback Your Performance
4.
Press the Select [-] and [+] buttons to select “Disk Utility.”
fig.08-13
5.
Press the [Rec] button.
6.
Press the Select [-] and [+] buttons to select “Format Disk.”
7.
Press the [Rec] button.
The following message, asking you to confirm, will be displayed.
fig.08-14
To cancel the procedure, press the [Reset] button.
8.
Press the [Rec] button again to perform the Format.
While formatting is in progress, the following display appears.
fig.08-15
When disk formatting is completed the following screen appears, then basic screen re-
appears.
Never attempt to remove the floppy disk until formatting is complete. NOTE
AT-20S.e.book 68 ページ ２００３年１１月１０日 月曜日 午後２時３７分