Roland AT800 - Manual (Page 254)

254
Connecting with External Device
When using the remote, point it toward the remote sensor on the ATELIER, and
stay within the allowable operating range described below.
Cautions when using the remote
• You can’t operate two or more of the remote’s buttons simultaneously.
• Even if the remote is within the operating range, it may not work if there
are obstacles between it and the remote sensor, or if the angle is poor.
• Malfunctions may occur if you use the remote near a device that produces
infrared light, or if you use another infrared remote control nearby.
• The battery life will depend on the conditions of use. The operating range
will decrease as the batteries run down. Replace the batteries if this occurs.
• If you won’t be using the remote for an extended period, remove the batteries.
• If a strong light such as a spotlight strikes the remote sensor, the remote
control may respond sluggishly.
Using the Remote
Remote Sensor
Front View
Over View
Operating range for the remote
Distance: 4 meters or less
Angle: 40 degrees or less (to left or right)
Remote
AT-800_e.book 254 ページ ２００８年１０月１５日 水曜日 午前９時３７分