Roland AT800 - Manual (Page 114)

114
Using the Registration Buttons
5.
Touch < > < > in the screen to select the save-
destination number.
Numbers which have not been used in the saving operation will be displayed
as “- - - - -.”
fig.03-09-2.eps
To cancel the Save operation, touch to close the Registration Save
screen.
6.
Touch .
The Save Format screen appears.
fig.03-14.eps
7.
Touch or .
8.
Touch .
Saving of the Registration data will begin.
When saving ends, the “- - - - -” in the screen will change to the Registration
name that you saved.
If you’ve named the Registration, it will be saved with that name.
Settings Description
Original
Save formats that can be used with the AT-900, AT-900C, AT-800,
AT-500, AT-300, AT-100 and AT-75.
When saved in this format, the data can also be used by AT-SL
Series, AT-45, AT-15 and AT-S Series devices.
R-Series Save formats that can be used with AT-R Series devices
You can also save Registrations
in a folder. Refer to“Saving
Registrations in a folder” (p.
115).
AT-800_e.book 114 ページ ２００８年１０月１５日 水曜日 午前９時３７分