Roland AT800 - Manual (Page 235)

235
Various Other Settings
Various Other Settings
9. Touch < > < > to select the media.
Choose “Ext Memory” to load an image from USB
memory, or choose “Disk” to load an image from floppy
disk.
The destination will show the names of the images saved
on the external media.
10. Touch < > < > to select the image that you
want to load into internal memory.
You can touch to verify the image.
11. Touch .
The image will be loaded.
If an image is already stored at the load destination, the
following screen will appear.
fig.09-37.eps
To erase the currently loaded image,
and load the new image
1. Touch .
To cancel image loading
1. Touch .
If the image cannot be loaded, the following screen will
appear.
fig.09-38.eps
1. Touch on the Main screen.
The System screen appears.
2. In the System screen, touch .
fig.00-38.eps
3. Touch .
fig.09-32.eps
The BMP Installer screen appears.
fig.09-34.eps
4. In the screen, touch <01>–<03> to select the
image that you wish to delete.
You can touch to verify the image.
Numbers for which “(Blank)” is shown have no image.
NOTE
NOTE
Deleting an Image Stored in Internal
Memory
AT-800_e.book 235 ページ ２００８年１０月１５日 水曜日 午前９時３７分