Connecting the speaker cable, Opening/closing the lid – Roland AT800 User Manual

Page 21

Before You Start Playing

Plug the speaker cable extending from the
stand into the Speaker connector located at
the rear of the AT-800’s bottom panel.

Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely
into place.

fig.00-22.eps

To open the lid, hold handles with both hands
and lift it straight up. Then, slide it to the rear.

To close the lid, slowly pull it forward until it
stops. Then, gently lower it into place.

Be careful not to get your fingers caught when opening or
closing the lid. Adult supervision is recommended when
small children are going to be using the instrument.

To prevent accidents, be sure to close the lid before moving
the organ.

Make sure you don’t have anything (such as sheet music) on
the keyboard when you close the lid.

Connecting the Speaker Cable

Speaker Cable

Organ

side

Speaker

box side

Opening/Closing the Lid

NOTE

AT-800_e.book 21 ページ２００８年１０月１５日　水曜日　午前９時３７分