Before you start playing, Setting up the music rest – Roland AT800 User Manual

Page 20

Before You Start Playing

Attaching the Music Rest

Insert the supplied screws for the music rest into the
screw holes located on the top of the instrument,
and lightly tighten them (two locations).

Put the music rest between the screws and the
ATELIER’s body.

While supporting the music rest with one
hand, secure it in place by turning the screws.

When attaching the music rest, support it firmly with one
hand to make sure that you don’t drop it. Be careful, so
you don’t get your fingers pinched.

Do not apply excessive force to the installed music rest.

Be sure to use the supplied screws for attaching the music
rest.

Before moving the piano, be sure to remove the music rest to
prevent accidents.

Removing the Music Rest

To remove the music rest, support it with one
hand while loosening the screws.

Remove the music rest.

After removing the music rest, don’t forget to retighten
the screws.

Setting Up the Music Rest

Screw

NOTE

AT-800_e.book 20 ページ２００８年１０月１５日　水曜日　午前９時３７分