Roland AT800 - Manual (Page 115)

115
Using the Registration Buttons
Using the Registration Buttons
If the following screen appears
If you select a number at which a Registration has already been saved and
touch , the following screen appears.
fig.E-63.eps
If you wish to update the contents of the Registration data
1.
Touch .
If you wish to save new data instead of updating the Registration
1.
Touch .
Rewriting of the Registration will be canceled.
2.
In the Registration Save screen, select the number that is
displayed as “-----” (a number that currently does not
contain Registration data).
3.
Touch .
When saving is complete, the saved Registration name will be displayed.
To create a folder, refer to
“Creating a Folder” (p. 45).
Saving Registrations in a folder
1. Carry out steps 1 through 4 of “Saving Registration Sets” (p. 113).
2. Touch < > < > to select a folder.
3. Touch the folder name.
The Registrations in the folder will be displayed.
4. Carry out steps 5 through 8 of “Saving Registration Sets” (p. 114).
To exit the folder
1. Touch < > < > to select “Up.”
2. Touch the “Up” indication.
AT-800_e.book 115 ページ ２００８年１０月１５日 水曜日 午前９時３７分