Roland AT800 - Manual (Page 222)

222
Various Other Settings
With some player piano CDs, the piano and accompaniment
sounds may not be synchronized properly. In such instances,
you can adjust the timing of the piano sounds so that they are
in time with the accompaniment.
1. Touch on the Main screen.
The Rec/Play screen appears.
2. Touch < > (Utility).
The Utility screen appears.
3. Touch .
The Rec/Play Options screen appears.
4. Touch < > < > to display the CD/Audio
Sync.
fig.09-16.eps
5. Touch the CD/Audio Sync setting.
fig.09-18.eps
6. Touch < > < > to change the setting.
7. Touch .
The basic pitch of an instrument is generally considered as the
pitch of the middle A note. The “Master Tune” parameter lets
you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the ATELIER.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Master Tune.
fig.09-24.eps
3. Touch the Master Tune setting.
fig.09-25.eps
4. Touch < > < > to change the setting.
5. Touch .
By touching < >, you can restore the default setting
(440.0 Hz).
This setting remains stored in memory even while power is
turned off.
Adjusting the Timing of a Player Piano
CD’s Piano sound and accompaniment
Setting
0–100
Other Settings
Adjust the Standard Pitch (Master Tune)
Setting
415.3Hz–466.2Hz (0.1 Hz units)
AT-800_e.book 222 ページ ２００８年１０月１５日 水曜日 午前９時３７分