Ricoh 2000 - Manual (Page 88)

Transmission
78
1
E
Press [IP].
The Search IP-Fax Destination screen appears.
F
Enter the IP-Fax destination you want to search for, and then press the {OK}
key.
If you enter the wrong destination, before pressing the {OK} key, press the
{Clear/Stop} key, and then enter the destination again.
G
Confirm the IP-Fax destination you entered, and then press the {OK} key.
When the search is finished, the results appear.
H
Select a destination using {U} or {T}, and then press {V} to specify it (put
a tick against it).
Multiple destinations can be selected.
Press {W} to deselect a destination.
I
Press the {OK} key.
Note
❒ If no destination matches the specified text, the “
Specified destination
is not programmed. ” message appears. Press [Exit] to return to the dis-
play of step D .
❒ You cannot specify destinations twice. If you try, the “
This destination
has already been programmed. ” message appears. Press [Exit] to return
to the standby screen.
❒ Press [Add Dest] to specify other destinations.