Ricoh 2000 User Manual

Page 107

Text mode
Original mode

Sender Settings

Enter the PIN Code, and then press the {OK} key.

The standby display appears.
If you make a mistake, press the {Clear/Stop} key before pressing the {OK}
key, and then try again.

Press the {Start} key.

Note

❒ For the maximum number of digits you can use in a PIN Code, see “Max-

imum Values”.

❒ You can enter numbers, p, q, and pauses.
❒ PIN Codes are not printed in lists and reports.
❒ You can set the machine so that a PIN Code must be entered after the fax num-

ber before you can send a fax. For details, contact your service representative.

Reference

p.186 “Maximum Values”
“Fax Features”, General Settings Guide