Ricoh 2000 - Manual (Page 52)

Transmission
42
1
Detecting Blank Sheet
Upon completion of the first page scanning, an alarm sounds if the page is nearly
blank.
Important
❒ The blank sheet-detecting function works only when an original is scanned
using the ADF or ARDF.
❒ The blank sheet-detecting function is ineffective for second and subsequent
pages.
This function notifies you if an original is placed wrong side down on the scan-
ner. When this happens, a message appears for a few seconds. The message dif-
fers depending on number of pages to be scanned and transmission mode.
• When sending a document using Immediate Transmission or when all pages
have been scanned in Memory Transmission:
• When some pages are left unscanned in Parallel Memory Transmission or
Memory Transmission:
Note
❒ Even if a near blank sheet is detected, it is transmitted as normal.
❒ You can turn this function on or off with the User Parameter (switch 11, bit 2)
in the Fax Features menu.
❒ To cancel scanning if a blank sheet is detected, press the {Clear/Stop} key.
Reference
“Fax Features”, General Settings Guide