Ricoh 2000 - Manual (Page 82)

Transmission
72
1
E
Enter the three-digit registration number using the number keys, and then
press the {OK} key.
If you enter the wrong registration number, before pressing the {OK} key,
press the {Clear/Stop} key, and then enter the registration number again.
When the search is finished, the results appear.
F
Press {V} to select a destination, and press the {OK} key.
To deselect a destination, before pressing the {OK} key, press {W}.
Note
❒ If no destination matches the specified text, the “
Specified destination
is not programmed. ” message appears. Press [Exit] to return to the dis-
play of step D .
❒ You cannot specify destinations twice. If you try, the “
This destination
has already been programmed. ” message appears. Press [Exit] to return
to the standby screen.
❒ Press [Add Dest] to specify other destinations.