Ricoh 2000 - Manual (Page 130)

Reception
120
3
Receiving documents according to parameter-specified settings
If one of the conditions in the following list occurs, the machine receives only
those documents that match the conditions specified in the User Parameters
(switch 05, bit 2, 1) in the Fax Features menu.
You can specify the following conditions with the User Parameters (switch 05, bit 2, 1)
in the Fax Features menu.
• When Own Name or Own Fax Number is received
The machine switches to Substitute Reception only when the sender has pro-
grammed their Own Name or Own Fax Number. If the power is switched off
for more than twelve hours, all the documents stored in memory are deleted.
In this case, the Journal can be used to identify the senders of the deleted doc-
uments, so you can ask them to resend.
If a sender has not programmed their Own Name or Own Fax Number, the
machine may fail to receive an important fax document. It is recommended
that you ask important senders to program an Own Name or Own Fax Num-
ber in advance.
• Free
The machine switches to Substitute Reception regardless of whether or not
the sender has programmed their Own Name or Own Fax Number.
• Disable
The machine does not receive any documents.
Reference
“Fax Features”, General Settings Guide
“Adding Paper and Replacing Toner”, Troubleshooting
“Clearing Misfeeds”, Troubleshooting
Problems Causes Solutions
h is lit. Paper is jammed. Remove the jammed paper.
For details about removing the paper, see
“Clearing Misfeeds”, Troubleshooting.
B is lit. All trays are out of paper. Add paper. For details about adding
paper, see “Adding Paper and Re-
placing Toner”, Troubleshooting.
G is lit. Toner is empty. Replace the toner bottle. For details
about replacing the toner bottle, see
“Adding Paper and Replacing Ton-
er”, Troubleshooting.
The message “ Problem
with this tray. ” ap-
pears.
All trays are out of action. Call your service representative.