Raritan Computer DOMINION KX II DKX2-0E-E - Manual (Page 38)

Step 1: Configure Target Servers
24
ƒ From the graphical user interface:
Figure 6: Solaris Mouse Configuration
ƒ With the command line:
xset mouse a t
(where “a” is the acceleration and “t” is the threshold.)
2. All target servers must be configured to one of the display
resolutions supported by Dominion KX II. The most popular
supported resolutions for Sun machines are:
Display
Resolution Vertical Refresh Rate Aspect
Ratio
1600 x 1200 75 Hz 4:3
1280 x 1024 60,75,85 Hz 5:4
1152 x 864 75 Hz 4:3
1024 x 768 60,70,75,85 Hz 4:3
800 x 600 56,60,72,75,85 Hz 4:3
720 x 400 85 Hz 9:5
640 x 480 60,72,75,85 Hz 4:3
3. Target servers running the Solaris operating system must output
VGA video (H-and-V sync, not composite sync).
¾
To change your Sun video card output from composite
sync to the non-default VGA output:
1. Issue the Stop+A command to drop to bootprom mode.
2. Issue the following command to change the output resolution:
setenv output-device screen:r1024x768x70
3. Issue the “boot” command to reboot the server.