Roland KR107 - Manual (Page 35)

35
Chapter 1 Performance
Chapter 1
4.
Touch the slider to make adjustment.
You can also move the slider with the dial.
When you press the [Exit] button, the equalization is placed in effect, and you return
to the previous screen.
Cancelling the Effect
5.
Touch .
❍
Storing the Settings
You can store adjusted equalizer settings to .
Even after editing the settings, you can touch to call up your preferred
settings.
1.
Press the [Sound Control] button and watch the indicator light up.
2.
Touch .
The “Equalizer screen” appears.
3.
Adjust the equalizer.
4.
Touch .
The settings are stored.
Even after editing the settings, you can touch to select the stored settings.
Displayed
Settings
Value
Explanation
Low -60–0–+60
Low-frequency range. This is the range of
frequencies for instruments like drums, bass,
organ, guitar and strings.
– -60–0–+60
Mid-low-frequency range. This is the range of
frequencies for lower brass and woodwind
instruments.
Mid -60–0–+60
Midrange. This is the range of frequencies where
most instrument sounds are concentrated.
– -60–0–+60
Mid-high-frequency range. The ear is most
sensitive to this frequency range.
High -60–0–+60
High-frequency range. These frequencies add
brilliance to the sound.
Master Level -60–0–+60
You can temper the distortion in the sound by
lowering the level. Raising the level too much may
cause the sound to become distorted.
KR107_e.book 35 ページ ２００５年８月３日 水曜日 午前９時３６分