Roland KR107 - Manual (Page 142)

142
Chapter 9 Various Settings
Chapter 9
Other Settings
You can change the tuning, the language shown on the
display, and other settings to make the KR easier to use.
■ Procedure
1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Press the [Option] button.
A “Functions screen” like the following appears.
fig.d-funcmenu2.eps_50
When you press the [Option] button on the Basic screen,
the first page displayed shows the parameters for the
Automatic Accompaniment settings (p. 138).
Measures
Specify the length (number of
measures) of the count-in. 1, 2
Repeat
When “Repeat” is turned ON
on the Marker screen (p. 87)
this specified whether the
count-in will sound each time
the range between the
markers is repeated, or only
the first time.
First, Every
Parameter Name Value
Parameter Explanation
Tuning Changing the tuning methods.
Pedal
Setting Assigns functions to the pedal and
performance pad (p. 144).
Master Tune Sets the KR’s standard pitch (p. 146).
External Display
Selects the content to be shown on the
connected external display (p. 158).
Language
Selects the language used in the
display (p. 147).
User Image
Display Selects the image data and display
used (p. 147).
Opening
Message Sets the message that appears when
the power is turned on (p. 148).
MIDI Setting Refer to p. 161.
Program
Change
Refer to p. 161.
Memory Backup
Stores edited settings and other data to
the KR (p. 148).
MIDI Ensemble Refer to p. 161.
Factory Reset
Restores the content stored with
Memory Backup to the original factory
settings (p. 149).
V-LINK Refer to p. 159.
Remote Control
Changing the functions of the remote
control’s buttons (p. 149).
USB Driver Refer to p. 166.
Remote Sensor
Sets the remote sensor’s on or off (p.
150)
Touch Screen
Allows for calibration of the touch
screen (p. 150).
KR107_e.book 142 ページ ２００５年８月３日 水曜日 午前９時３６分