Roland KR107 - Manual (Page 100)

100
Chapter 5 Recording and Saving the Performance
Chapter 5
■ Formatting Media (Format)
The process of preparing external memory or disks so that they can be used with the
KR107 is called “initialization” (formatting).
In certain cases, particularly with floppy disks, the media is formatted for a specific
type of device. If the media format does not match the KR107’s, you will not be able
to use that media with the KR107.
fig.panel4-3
1.
Connect the external memory to the external memory port.
2.
Press the [Song/File] button.
3.
Touch .
A “File screen” like the one below appears.
fig.d-songfile.eps_60
4.
Touch .
The following screen appears.
NOTE
When an external memory is
initialized, all of the data
saved on the external
memory is erased. If you’re
formatting a used external
memory for reuse, be sure to
check first to make sure the
external memory doesn’t
contain any data you don’t
want to lose.
NOTE
When initializing floppy disks,
check to make sure that the
disk’s write protect tab is slid
to the “write” position.
NOTE
Do not disconnect the
external memory while data
is being read from or written
to the memory.
NOTE
Do not eject the floppy disk
while data is being read from
or written to the disk. This
may scratch the disk’s
magnetic surface, rendering
the memory unusable. (The
disk drive’s indicator lights
brightly while data is being
read from or written to the
disk. At all other times, the
indicator is lit more dimly, or
is not lit at all.)
KR107_e.book 100 ページ ２００５年８月３日 水曜日 午前９時３６分