The power is turned on (p. 148), The kr (p. 148), 148 chapter 9 various settings – Roland KR107 User Manual
Page 148
148
Chapter 9 Various Settings
Chapter 9
■
Changing the Screen Message
When the Power Is Turned On
(Opening Message)
You can modify this screen to show your favorite phrase
when the power is turned on.
At Step 3 in “Procedure” (p. 142), touch
A screen like the one shown below appears.
fig.d-openmsg.eps_50
Use
to move the cursor.
When you touch the character icon, the character is input
where at the position.
When you touch the icon for the character to be input, the
character appears at the cursor position. For example,
touching the
available choices in that character group (A
→
B
→
C
→
A...).
Each touch of
“English (upper case),” “English (lower case),” “numerals,”
“symbols,” then back to “English (upper case).”
When you touch , the character at the cursor position is
deleted.
When you touch , a space is inserted at the cursor
position.
When you have finished inputting the characters, touch
NOTE
Never turn off the power while the display indicates
memory, making it unusable.
If you touch
then touch
that normally appears when you turn on the power to
the instrument.
■
Remembering the Settings
Even When the Power is
Turned Off (Memory Backup)
Normally, the various settings revert to their default values
when the power is turned off. However, you can specify that
the settings will be remembered even when the power is
turned off. This function is called “Memory Backup.”
For more on the settings stored using Memory Backup,
refer to “Parameters Stored in Memory Backup” (p. 184).
At step 3 in “Procedure” (p. 142), touch
fig.d-memory.eps_50
Touch
The confirmation message appears on screen.
Touch
When the setting has been stored in memory, the previous
screen will reappear.
NOTE
Never turn off the power while the display indicates
memory, making it unusable.
KR107_e.book 148 ページ 2005年8月3日 水曜日 午前9時36分