Ricoh BY1000 - Manual (Page 61)

61
Making Printer Settings
14. Press the [ ] or [ ] key to enter the adjustment values (-4.0 to +4.0) in the [Read Direction] from
step 7 , and then press the [#Enter] key.
15. Press the [ ] or [ ] key to enter the adjustment values (-4.0 to +4.0) in the [Feed Direction] from
step 7 , and then press the [#Enter] key.
16. Press the [Online] key.
The initial screen appears.
System Menu
You can set basic functions required to use the printer. The printer can be used on factory default, but the config-
uration can be changed depending on the condition of the user. The changed condition holds even if the printer
is turned off.
Auto Continue
You can specify how the printer handles a print job if it does not have a tray containing paper of the size
and type specified in the printer driver.
z
Off
The printer does not print until a tray containing paper of the size and type required for the print job is
inserted.
z
On
The printer prints even if the paper size or paper type is different from that specified.
Default: Off
Sub Paper Size
You can specify whether to print on A4 paper if the printer is not equipped with a paper tray that can feed
Letter (8
1 /
2
×11) paper specified on the printer driver, and vice versa.
z
Auto
z
Off
Default: Off
Energy Saver
Use Energy Saver mode to reduce the printer's power consumption.
z
E.Saver ON/OFF
You can select whether or not the printer switches to Energy Saver mode when idle.
z
On
z
Off
Default: Off
z
E.Saver Timer
R e a d D i r e c t i o n :
( - 4 , + 4 ) 0 . 0
F e e d D i r e c t i o n :
( - 4 , + 4 ) 0 . 0