Ricoh BY1000 - Manual (Page 59)

59
Making Printer Settings
Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking
the test pattern printed.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [#Enter] key.
3. Press the [ ] or [ ] key to display [Registration], and then press the [#Enter] key.
4. Press the [ ] or [ ] key to display [Prt. Test Sheet], and then press the [#Enter] key.
5. Press the [ ] or [ ] key to select a paper tray, and then press the [#Enter] key.
6. Press the [ ] or [ ] key to select a paper type, and then press the [#Enter] key.
A test pattern to adjust the print start position is printed.
7. Check the optimal adjustment values on the printed test pattern.
M e n u :
M a i n t e n a n c e
M a i n t e n a n c e :
R e g i s t r a t i o n
R e g i s t r a t i o n :
P r t . T e s t S h e e t
P r t . T e s t S h e e t :
T r a y 1
P r t . T e s t S h e e t :
* P l a i n P a p e r