Ricoh BY1000 User Manual
Page 221
221
Monitoring and Configuring the Printer
Configure SMB
Configure SNMP
Configure SMTP (Group 1)
Configure SMTP (Group 2)
IP Filter Config – Filter #3 End Address You can specify the IP filter's end address.
Settings
Description
SMB
You can select whether or not to use the SMB protocol.
Computer Name
You can specify the computer name.
Workgroup
You can specify the workgroup.
Comment
You can enter a comment.
Printing Complete Message
You can select whether or not to issue the Printing Complete
message.
Browse Master
You can select whether or not to use the Browse Master.
Settings
Description
Authentic Community
You can specify the SNMP authentic community name.
Trap Community
You can specify the SNMP trap community name.
Trap Address (IP)
You can specify the IP address of the SNMP trap destination.
SysContact
You can specify SysContact.
SysName
You can specify SysName.
SysLocation
You can specify SysLocation.
Enable Authen Trap
You can enable or disable Enable Authen Trap.
Settings
Description
SMTP
You can select whether or not to use the SMTP protocol.
SMTP Server Name
You can specify the name of the SMTP server.
SMTP Port Number
You can specify the SMTP port.
Device E-mail Address
You can specify the printer's e-mail address.
Administrator E-mail Address
You can specify the administrator's e-mail address.
Text in E-mail
You can enter a shared comment.
Settings
Description
SMTP
You can select whether or not to use the SMTP protocol.
SMTP Server Name
You can specify the name of the SMTP server.
SMTP Port Number
You can specify the SMTP port.
Device E-mail Address
You can specify the printer's e-mail address.
Administrator E-mail Address
You can specify the administrator's e-mail address.
Settings
Description