Ricoh BY1000 User Manual
Page 220
220
Monitoring and Configuring the Printer
5 : Configure SNMP
6 : Configure SMTP
7 : Configure SMTP (Group 1)
8 : Configure SMTP (Group 2)
9 : Configure SMTP (Group 3)
10 : Configure SMTP (Group 4)
96 : Display Status
97 : Reset Settings to Defaults
98 : Restart Print Server
99 : Exit
Configure General
Configure TCP/IP
Settings
Description
Change root Password
You can change the administrator's password.
LAN Interface
You can specify which interface to use.
Settings
Description
DHCP/BOOTP
You can select whether or not to use the DHCP/BOOTP pro-
tocol.
RARP
You can select whether or not to use the RARP protocol.
IP Address
You can specify the static IP address.
Subnet Mask
You can specify the subnet mask.
Default Gateway
You can specify the gateway address.
Host Name
You can specify the host name.
Use DHCP Domain Option
You can select whether or not to use the DHCP domain op-
tion.
Domain
You can specify the domain name.
IPv6 Function
You can select whether or not to use IPv6.
DNS
You can specify the DNS setting.
IP Filter Config – Filter Mode
You can specify the IP filter operating mode.
IP Filter Config – Filter #0 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #0 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #1 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #1 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #2 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #2 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #3 Start Address You can specify the IP filter's start address.