Nortel Networks NN43001-318 User Manual
Page 65

Installation procedures
65
Connecting the ISDN BRI terminals (for line applications)
For line applications, five procedures are required to connect ISDN BRI
terminals to the system:
Step
Action
1
Connect system cables to the cross-connect terminal. See
Procedure 20 "Connecting system cables to the cross-connect
terminal" (page 66)
.
2
Cross-connect the DSLs at the cross-connect terminal. See
Procedure 21 "Cross-connecting the DSLs at the cross-connect
terminal" (page 70)
.
3
Connect the terminating resistor to the SILC DSL. See
"Connecting the terminating resistor to the SILC DSL" (page 74)
4
Connect the ISDN BRI terminals to the DSL. See
"Connecting the ISDN BRI terminals to the DSL" (page 76)
5
Initialize the terminals. See
Procedure 24 "Initializing a Nortel
Networks M5317TDX terminal" (page 80)
—End—
Figure 19 "Connecting ISDN BRI terminals to the system" (page 66)
shows
a typical DSL and multiple ISDN BRI terminals connected to the system.
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003-2007, Nortel Networks
.