Nortel Networks NN43001-318 - Manual (Page 6)

6 Contents
Testing an ISDN BRI trunk 103
Removing the test setup 103
Generating traffic reports 105
Contents 105
Introduction 105
Procedures
Procedure 1 Selecting the card slots 16
Procedure 2 Remove the module cover for card installation 20
Procedure 3 Installing the MISP 21
Procedure 4 Removing the MISP 21
Procedure 5 Installing the BRSC, SILC, and UILC 22
Procedure 6 Remove the BRSC, SILC, and UILC 23
Procedure 7 Connecting ISDN BRI terminals to the system 23
Procedure 8 Connect the modules to the MDF 24
Procedure 9 Cross-connecting SILC and/or UILC ports to the building
wiring 29
Procedure 10 Connecting the ISDN BRI terminals to the DSL 36
Procedure 11 Providing clock referencing on the SILC 39
Procedure 12 Connecting clock reference cables 41
Procedure 13 Performing acceptance testing 48
Procedure 14 Selecting the card slots 58
Procedure 15 Installing the MISP 59
Procedure 16 Removing the MISP 60
Procedure 17 Installing the SILCs and UILCs 61
Procedure 18 Removing the SILC and UILC 64
Procedure 19 Installing the PRI hardware 64
Procedure 20 Connecting system cables to the cross-connect terminal 66
Procedure 21 Cross-connecting the DSLs at the cross-connect terminal 70
Procedure 22 Connecting the terminating resistor to the SILC DSL 74
Procedure 23 Connecting the ISDN BRI terminals to the DSL 76
Procedure 24 Initializing a Nortel Networks M5317TDX terminal 80
Procedure 25 Connecting the system cables to the cross-connect
terminal 82
Procedure 26 Cross-connecting DSLs at the cross-connect terminal 83
Procedure 27 Performing a call hold test 88
Procedure 28 Perform a Call Waiting test 89
Procedure 29 Performing a Call Forward No Answer test 91
Procedure 30 Perform a Calling Line Identification Presentation test 92
Procedure 31 Perform an ISDN BRI Conference test 93
Procedure 32 Perform a Call Join test on Conference 94
Procedure 33 Perform a hunting test 96
Procedure 34 Perform an ISDN BRI NI-1 Call Forward All Calls test 97
Procedure 35 Perform an ISDN BRI ETSI Call Forwarding Unconditional
test 98
Procedure 36 Perform a circuit-switched data call test 99
Procedure 37 Perform a B-channel packet data transmission test using an
external packet handler 100
Procedure 38 Perform a D-channel packet data transmission test using an
external packet handler 101
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2003-2007, Nortel Networks
.