Procedure 8 connect the modules to the mdf, Procedure 8, Connect the modules to the mdf – Nortel Networks NN43001-318 User Manual

Page 24

Text mode
Original mode

Installing ISDN BRI hardware

Figure 5
Connect the ISDN BRI terminals to the Large System

Procedure 8

Connect the modules to the MDF

Step

Action

Modules connect to the MDF using NE-A25B cables with 50-pin D-type male
connectors on each end. One end of the cable plugs into the Input/Output
(I/O) panel at the rear of the module, and the other end plugs into the MDF.

Nortel Communication Server 1000

ISDN Basic Rate Interface Installation and Commissioning

NN43001-318

01.02

Standard

Release 5.0

20 June 2007