beautypg.com

Packet data transmission, Procedure 37, External packet handler – Nortel Networks NN43001-318 User Manual

Page 100

background image

100

Testing ISDN BRI functions

Packet data transmission

A packet data call can be established between two data terminals over a
B-channel or a D-channel.

B-channel packet data terminals communicate with the packet handler at 64
kbps over dedicated B-channels. The packet handler may be an external
packet handler, the DPN-100, or the integrated MPH. The packet handlers
processes and distributes the data to local terminals for local calls or over
the packet data network for remote calls.

D-channel packet data terminals communicate at a baud rate of up to 9.6
kbps. The packet data is multiplexed onto a 64 kbps BD that is linked with
the external packet handler through a dedicated ISDN PRI B-channel, or, in
the case of the MPH, through a dedicated connection.

Note: To perform packet data transmission verification, the system
must be connected to a DPN-100, or configured with MPH. Also, packet
data transmission functions must be selected when configuring the
B-channel and D-channel transmission characteristics. Use LD 27 to
specify the packet data transmission functions. See "MISP configuration
procedures" in ISDN Basic Rate Interface Feature Fundamentals
(NN43001-580)
.

In addition to configuring the MISP and the DSL in LD 27, ensure the
following:

the ISDN PRI loop carrying packet data was configured in LD 17

the packet handler route was specified in LD 16

an ISDN PRI channel for the packet handler route was configured using
LD 14

See ISDN Basic Rate Interface Feature Fundamentals (NN43001-580) for
a detailed description of how to configure relevant ISDN BRI packet data
transmission parameters in LD 17, LD 16, and LD 14.

Procedure 37

Perform a B-channel packet data transmission test using an external packet
handler

Step

Action

1

From an ISDN BRI B-channel packet data terminal, dial another
local or a remote ISDN BRI packet data terminal and establish an
active call connection.

After the call-originating ISDN BRI terminal receives an

Nortel Communication Server 1000

ISDN Basic Rate Interface Installation and Commissioning

NN43001-318

01.02

Standard

Release 5.0

20 June 2007

Copyright © 2003-2007, Nortel Networks

.