Nortel Networks 8005DC User Manual
Page 38
38
Metro Ethernet Routing Switch 8600 modules
8630GBR module
Nortel qualified the SFP transceivers listed in
for use in the 8630GBR module:
8630GBR qualified SFP transceivers
SFP order number
SFP type
AA1419013
1000BaseSX
AA1419014
1000BaseSX
AA1419015
1000BaseLX
AA1419025 - AA1419032
1000BaseCWDM
AA1419033 - AA1419040
1000BaseCWDM
AA1419042
1000BaseT
AA1419071
1000Base-EX
AA1403006
10GBASE-ZR/ZW
Only SFP transceivers that Nortel qualified are supported for use in the
8630GBR module. SFP transceivers that Nortel did not qualify can operate
within the module, but were not tested for power draw, electromagnetic
interference, and interoperability.
For more information about the SFP transceivers and instructions for
installing them, see Nortel Installation — SFP, XFP, and GBIC Hardware
Components (NN46225-301).
ATTENTION
The 8630GBR module is not supported when Single Fiber Fault Detection (SFFD)
is configured on a port.
"8630GBR module LEDs" (page 39)
shows the location of the 8630GBR
module LEDs.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306
02.02
Standard
4.2
7 July 2008
Copyright © 2005-2007, Nortel Networks
.